xTool
xTool O1 Omni UV printing jigs.
Both plates carry a replaceable tacky mat. A tray is laid on the bed and located by Pixel-Scan.
Create UV printing jigs for the standard bed and the mini bed using the 22mm grid. Both beds use the same jig system, so a jig designed for one can be used on the other.
£4.99 a jig, whatever size you make it.
2
measured beds
285
cells, largest bed
330 × 420
mm printable
£4.99
a jig, any size
The beds
What fits where.
Standard bed
- Printable area
- 330 × 420mm
- Grid capacity
- 15 × 19 = 285 cells
- Rim left over
- 0.0 × 2.0mm
- Mat lattice
- 33 × 42 holes, ø5 on 10mm
- Machine zero
- bottom left
- Full-bed file
- £4.99
Source: omni-jig-maker bed.js BEDS.standard.print (published)
Mini bed
- Printable area
- 330 × 122mm
- Grid capacity
- 15 × 5 = 75 cells
- Rim left over
- 0.0 × 12.0mm
- Mat lattice
- 33 × 12 holes, ø5 on 10mm
- Machine zero
- bottom left
- Full-bed file
- £4.99
Source: omni-jig-maker bed.js BEDS.mini.print (published)
The contract
Same everywhere.
These four numbers are the whole system. A block printed for a Morpho drops into an Omni tray and into an E1 bed.
- Cell
- 22mm
- Foot
- 21.5mm
- Socket
- 4.75mm deep
- Clearance
- 0.25mm a side
Free xTool print beds
Download and print the xTool grid bed files for free. No account is required, and no email address. The jigs that sit on them are the paid part.
Get the bed files