Morpho
Morpho UV printer jigs.
Both run the same base-and-plate stack. A block printed for the A4 drops directly into the A3.
Create UV printing jigs for the a4 platform and the a3 printbed using the 22mm grid. Both beds use the same jig system, so a jig designed for one can be used on the other.
£4.99 a jig, whatever size you make it.
2
measured beds
285
cells, largest bed
330 × 420
mm printable
£4.99
a jig, any size
The beds
What fits where.
A4 platform
- Printable area
- 330 × 220mm
- Grid capacity
- 15 × 10 = 150 cells
- Rim left over
- 0.0 × 0.0mm
- Mat lattice
- 33 × 22 holes, ø5 on 10mm
- Machine zero
- bottom left
- Full-bed file
- £4.99
Source: morpho-jig-maker plate.js PLATES.a4.print
A3 printbed
- Printable area
- 330 × 420mm
- Grid capacity
- 15 × 19 = 285 cells
- Rim left over
- 0.0 × 2.0mm
- Mat lattice
- 33 × 42 holes, ø5 on 10mm
- Machine zero
- bottom left
- Full-bed file
- £4.99
Source: morpho-jig-maker plate.js PLATES.a3
The contract
Same everywhere.
These four numbers are the whole system. A block printed for a Morpho drops into an Omni tray and into an E1 bed.
- Cell
- 22mm
- Foot
- 21.5mm
- Socket
- 4.75mm deep
- Clearance
- 0.25mm a side
Free Morpho print beds
Download and print the Morpho grid bed files for free. No account is required, and no email address. The jigs that sit on them are the paid part.
Get the bed files