HeyGears G1 UV printing jigs.
A 330 x 420 standard flatbed, the same size as the Morpho A3 and the Omni standard, so a tray printed for any of them fits, and a 330 x 130 mini flatbed. Sold as the G1 and the G1X, which are the same machine.
Create UV printing jigs for the standard flatbed and the mini flatbed using the 22mm grid. Both beds use the same jig system, so a jig designed for one can be used on the other.
£4.99 a jig, whatever size you make it.
What fits where.
Standard flatbed
- Printable area
- 330 × 420mm
- Grid capacity
- 15 × 19 = 285 cells
- Rim left over
- 0.0 × 2.0mm
- Mat lattice
- 33 × 42 holes, ø5 on 10mm
- Machine zero
- not established
- Full-bed file
- £4.99
Source: machinesformakers.com G1 series listing; G1 = G1X confirmed by David, 28 Sep 2026
Mini flatbed
- Printable area
- 330 × 130mm
- Grid capacity
- 15 × 5 = 75 cells
- Rim left over
- 0.0 × 20.0mm
- Mat lattice
- 33 × 13 holes, ø5 on 10mm
- Machine zero
- not established
- Full-bed file
- £4.99
Source: fauxhammer.com G1X review and openelab.io G1X spec sheet, 330 x 130; added 13 Oct 2026
Same everywhere.
These four numbers are the whole system. A block printed for a Morpho drops into an Omni tray and into an E1 bed.
- Cell
- 22mm
- Foot
- 21.5mm
- Socket
- 4.75mm deep
- Clearance
- 0.25mm a side
Free HeyGears print beds
Download and print the HeyGears grid bed files for free. No account is required, and no email address. The jigs that sit on them are the paid part.
Get the bed files