eufyMake E1 UV printing jigs.
Two flatbeds. The mini locks on with the machine’s own lever. Work on the standard 330 x 420 field is placed against a calibrated zero.
Create UV printing jigs for the mini flatbed and the standard flatbed using the 22mm grid. Both beds use the same jig system, so a jig designed for one can be used on the other.
£4.99 a jig, whatever size you make it.
What fits where.
Mini flatbed
- Printable area
- 330 × 90mm
- Grid capacity
- 15 × 4 = 60 cells
- Rim left over
- 0.0 × 2.0mm
- Mat lattice
- 33 × 9 holes, ø5 on 10mm
- Machine zero
- bottom right
- Full-bed file
- £4.99
Source: eufyMake published; eufy-jig-maker bed.js PRINT_AREA_RESOLVED
Standard flatbed
- Printable area
- 330 × 420mm
- Grid capacity
- 15 × 19 = 285 cells
- Rim left over
- 0.0 × 2.0mm
- Mat lattice
- 33 × 42 holes, ø5 on 10mm
- Machine zero
- bottom right
- Full-bed file
- £4.99
Source: eufyMake published print area; eufy-jig-maker bed.js STANDARD, measured 2026-08-28
Same everywhere.
These four numbers are the whole system. A block printed for a Morpho drops into an Omni tray and into an E1 bed.
- Cell
- 22mm
- Foot
- 21.5mm
- Socket
- 4.75mm deep
- Clearance
- 0.25mm a side
Free eufyMake print beds
Download and print the eufyMake grid bed files for free. No account is required, and no email address. The jigs that sit on them are the paid part.
Get the bed files